Some disassembly may be required to view the label on fixed units.

• Casement & Awning Vent (includes piano hinge, radius, push-out and French units
• Casement - head jamb cladding near the end of the hinge track
• Awning - head jamb cladding upper right corner
• 1 -Piece & 2-Piece Fixed Casement (includes radius and geometric) - under sill stop in corner nearest glass etching - requires disassembly
• Auxillary (includes rectangular, radius, geometric and exterior glazed) - beneath secondary stop in corner nearest glass etching - requires disassembly
• Double-Hung Vent (includes single-hung, single-hung non-tilt and RetroFit) - head jamb in pocket above top sash
• Repalcement Sash Kit Double-Hung - interior surface of top sash check rail, visible when window is open
• Double-Hung Picture & Double-Hung Transom - rail beneath glass stop on corner nearest glass etching- requires disassembly
• Slide-By Window- jambliner at head near active side
• Inswing Door Vent (includes single, double, post doors and venting sidelites) - top of panel nearest lock side
• Inswing Door Sidelite & Transom - rail beneath glass stop on corner nearest glass etching - requires dissembly
• Outswing Door Vent (includes single, double and venting sidelites) - head frame cladding upper right and cornerr near weather strip
• Sliding Door - aluminum head track nearest lock side
• Sliding Door Sidelite - head jamb screen track, right side as viewed from interior